RIO-15 Advanced I/O Module
The RIO-15 Multi-IO Module provides an easy way to collect analog and digital signal information and in many instances can completely eliminate the need for an RTU at remote points. All I/O has transient and over voltage protection. The RIO-15 can mount directly to a DIN rail or be mounted to a back plane with built-in mounting clips. The unit is available as a MODBUS slave, as a wireless I/O mirror and with user-specific applications. All control and configuration is protected on loss of power and restored on power-up.
Pricing
| Description | Quantity |
**Price |
|---|---|---|
| Board Options | ||
| RIO-15 Multi-IO Module, 9-14V |
1 |
$377 |
| RIO-15-28 Multi-IO Module, 10-28V |
1 |
$399 |
Specifications
- Download the RIO Family Configuration Program (with manuals)
- RIO Family Documentation
- Warranty Information
Mirroring Interface Features
- 4 digital channels mirrored
- 2 analog channels mirrored
- User mapping of IO across multiple units
- User settable failsafe modes
- MODBUS commands supported while in mirroring mode
Hardware Features
- Compatible with the CDR-9150, CDR-915 and CDR-915L
- Wireless*, RS-232 or RS-485 interface
- All outputs and counters saved on power loss.
- 4 - channels of 12 bit A/D conversion 0-20mA.
- 1 - channel of 12 bit A/D monitoring supply voltage.
- 2 - channels of 12 bit D/A conversion (4-20mA).
- 4 - open collector (solid state form A) digital outputs.
- 4 - optically isolated digital inputs.
- 8 - DIP switch inputs for mode and configuration.
- 12 - LED status indicators
- Power requirements 9-14 VDC (10-28 VDC optional)
- DIN Rail / panel mount enclosure.
- RTS/CTS support for legacy LMR systems
- Programmable Baud Rate and Parity
- Breakaway terminal strips for easy field swaps
MODBUS™ Interface Features
- 4 channels of 12 bit A to D loadable from input registers 30001-30004.
- Supply voltage monitor loadable from input register 30005.
- 2 channels of 4-20mA analog output settable from holding registers 40001 and 40002
- 4 channels of isolated digital inputs read as status inputs 1 to 4 (10001-10004).
- 4 channels of open collector output written as coil 1 to 4 (00001-00004).
- 4 input channels with pre-settable 16 bit pulse counters for AMR applications.
- Slave address settable from 1-255 using on-board DIP switch.
- On-board LED indicators show status, poll, response, I/O state and error.
- RTU interface protocol.
*Radio not included.
**Prices subject to change without notice. Call for quantities over 10.