RIO-8 Wireless I/O Module

  

 

The RIO-8 Wireless I/O Module provides an easy way to read and control digital signals and in many instances can completely eliminate the need for an RTU at remote points.  All I/O has transient and over voltage protection. Units may be configured for standalone IO mirroring. IO mapping is configurable for point to point as well as point to multipoint applications. All control and configuration is protected (in non-volatile memory)  on loss of power and restored on power-up.

Pricing

Description Quantity

**Price
RIO-8 Wireless I/O Module
RIO-8  Wireless I/O Board, 8-14V

1 

$332
OPT-28 9-28V Power Supply

1 

$22
CON-92089A 9 Position Mating Connector (2 required) 1 $7.99
 

Specifications

Hardware Features

  • 200mW Transmit Power
  • License Free Operation
  • Local or Remote Antenna Options
  • DIN Rail or Panel Mounting
  • All output states,  counters and configuration  saved on power loss and restored on power up.
  • 4 - 2 Amp Dry contact relay outputs
  • 4 - optically isolated digital inputs.
  • 12 - LED status indicators
  • Power requirements 8-14 VDC (9-28 VDC optional)
  • Breakaway terminal strips for easy field swaps

MODBUS™ Interface Features

  • 4 channels of isolated digital inputs read as status inputs 1 to 4  (10001-10004).
  • 4 channels dry contact relay outputs written as coil 1 to 4 (00001-00004).
  • 4 input channels with pre-settable 16 bit pulse counters for AMR applications.
  • Slave address settable from 1-247 using PC application.
  • On-board LED indicators show status, poll, response, I/O state and error.
  • RTU interface protocol.

Mirroring Interface Features

  • 4 channels mirrored
  • User mapping of IO across multiple units
  • User settable failsafe modes
  • MODBUS commands supported while in mirroring mode

**Prices subject to change without notice.  Available now.