RIO-15C Specifications

Overall

Protocol	Modbus RTU
Communications Interface	RS-232, RS-485, or wireless
Data Interface Rate	2400, 4800, 9600, 19.2k, or 56k baud
Data Interface Parity	none, even, or odd
Handshaking	hardware (RTS/CTS)
Temperature	-30 to +70 °C
Error Detection	16-bit CRC
Digital Out Switch	200mA, 28V max.
Digital Input Range	28V max., Form A
Pulse Counting	300pps max.
Pulse Count Depth	32-bit (>4 billion counts)
Pulse Width	1ms min.
Dig. In Debounce	0 to 255 ms
Analog Input Range	0 to 20mA, 28V max.
Analog Output Range	4 to 20mA, 28V max.
ADC Accuracy	better than 1%, 0.2% typ.
DAC Accuracy	better than 1%, 0.2% typ.

Power Requirements

Input Voltage (standard)	9 to 15 VDC
Input Voltage (-28 models)	10 to 28 VDC
Input Current	65 to 150 mA

Mechanical

Size	6.25" x 3.50" x 2.25"
Mounting	Panel or 1.5" DIN rail

LED Indicators

Status	blinks green during normal operation*
Busy	blinks yellow while receiving data
Transmit	blinks red while transmitting data
Error	lit red in mirror mode when communication is lost
DO1, DO2, DO3, DO4	lit green while DO-n output is on** (pulled to ground)
DI1, DI2, DI3, DI4	lit yellow while DI-n input is on (pulled to ground)

* Output will be solid-on during firmware updates.

** Output will blink green rapidly in failsafe mode.

Reset Button

The RIO-15C has one external switch. Pushing the reset button will quickly reset the device. Holding the reset button for 15 seconds or more will reset the serial mode to 9600 baud and no parity.

The reset button is disabled during firmware updates to protect the unit.